Featured

  • Good quality Molly Bolt Anchor - Stainless Steel Flange Lock Nuts – Chuanyi

    Good quality Molly Bolt Anchor - Stainless Steel Flange Lock Nuts – Chuanyi

    Description Metric Lock Nuts all have a feature that creates a non-permanent “locking” action. Prevailing Torque Lock Nuts rely upon thread deformation and must be wrenched on and off; they are not chemical and temperature limited like Nylon Insert Lock Nuts but reuse is still limited. K-Lock Nuts are free-spinning and reusable. Reuse of Nylon Insert Lock Nuts is limited and the captive nylon insert is susceptible to damage by certain chemicals and temperature extremes; wren...
  • Chinese Professional Serrated Lock Nut - Removing Stripped Galvanized Hex Bolts – Chuanyi

    Chinese Professional Serrated Lock Nut - Removing Stripped Galvanized Hex Bolts – Chuanyi

    Description Hex bolts are used to fasten two or more parts together to form an assembly either because it cannot be manufactured as a single part or to allow for maintenance and repair disassembly.Hex bolts are mostly used in repair and construction work. they have a hexagonal head and come with machine threads for a firm and rough handling. They come in a wide range of different hex bolt sizes for custom applications depending on its dimensional requirements. These Hex Bolts come in th...
  • OEM China Solid Rivet Setter - Forged Eye Nuts and Stainless Steel Eye Nuts – Chuanyi

    OEM China Solid Rivet Setter - Forged Eye Nuts and Stainless Steel Eye Nuts – Chuanyi

    Description Eye Nuts. Commonly used in the lifting and rigging industry, eye nuts are internally threaded fasteners used for lifting and securing cables, wires and chains. Eye nuts are made from forged carbon steel, zinc-plated steel, stainless steel or hot dipped galvanized steel. In addition to the structural material, choose the thread dimensions and, if relevant, the working load limit to fit your application. General Material-Body Steel, Stainless Steel Strength Rating 70...
  • Factory supplied Drywall Screws 38mm - Self Drilling Drywall Screws For Metal Studs – Chuanyi

    Factory supplied Drywall Screws 38mm - Self Drilling Drywall Screws For Metal Studs – Chuanyi

    Description Drywall screws made of hardened carbon steel or stainless steel are used for fastening drywall to wood studs or to metal studs. They have deeper threads than other kinds of screws, which can prevent them from removing easily from the drywall. Drywall screws are usually bugle head screws with spaced threads and sharp points. Classified by the pitch of thread, there are two common kinds of drywall screw threads: fine thread and coarse thread. Fine thread drywall screws have sh...
  • Excellent quality M12x1 75 Flange Bolt – Stainless Steel Flange Head Bolts – Chuanyi

    Excellent quality M12x1 75 Flange Bolt – Stainless Steel Flange Head Bolts – Chuanyi

    Description flange head bolts are used to fasten two or more parts together to form an assembly either because it cannot be manufactured as a single part or to allow for maintenance and repair disassembly.flange head bolts are mostly used in repair and construction work. they have a flange head head and come with machine threads for a firm and rough handling. They come in a wide range of different flange head bolts sizes for custom applications depending on its dimensional requirements....
  • OEM/ODM China M10 Flange Bolt - Stainless Steel Serrated Flange Nuts – Chuanyi

    OEM/ODM China M10 Flange Bolt - Stainless Steel Serrated Flange Nuts – Chuanyi

    Description flange nuts are one of the most common nuts available and are used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads. Flange is which means they have flange bottom. Metric Flange Nuts resemble and are frequently used with Flange Bolts. They share the same flange that flares to a diameter that’s larger than the hex section and machine screw threads that are either coarse or fine; the bearing surface can be smooth ...
  • Chinese Professional Flange Head Bolt - Full Threaded Rod – Power Steel Specialist Trading Corporation – Chuanyi

    Chinese Professional Flange Head Bolt - Full Threaded Rod – Power Steel Specialist Trading Corporation – Chuanyi

    Description Full threaded rods are common, readily available fasteners that are used in multiple construction applications. Rods are continuously threaded from one end to the other and are frequently referred to as fully threaded rods, redi rod, TFL rod (Thread Full Length), ATR (All thread rod) and a variety of other names and acronyms. Rods are typically stocked and sold in 3′, 6’, 10’ and 12’ lengths, or they can be chopped to a specific length. All thread rod that is cut to shorter ...
  • PriceList for Dome Head Hex Bolts - Full Threaded Rod – Power Steel Specialist Trading Corporation – Chuanyi

    PriceList for Dome Head Hex Bolts - Full Threaded Rod – Power Steel Specialist Trading Corporation – Chuanyi

    Description Full threaded rods are common, readily available fasteners that are used in multiple construction applications. Rods are continuously threaded from one end to the other and are frequently referred to as fully threaded rods, redi rod, TFL rod (Thread Full Length), ATR (All thread rod) and a variety of other names and acronyms. Rods are typically stocked and sold in 3′, 6’, 10’ and 12’ lengths, or they can be chopped to a specific length. All thread rod that is cut to shorter ...
  • Factory Cheap Hot Heavy Duty Self Drilling Metal Screws - Steel Yellow Zinc Plated Phillips Flat Head Chipboard Screw – Chuanyi

    Factory Cheap Hot Heavy Duty Self Drilling Metal Screws - Steel Yellow Zinc Plated Phillips Flat Head Chipboard Screw – Chuanyi

    Description Chipboard screws are self-tapping screws with a small screw diameter. It can be used for precision applications like the fastening of chipboards of varying densities. They have coarse threads to ensure the perfect sitting of the screw on the chipboard surface. Most of the chipboard screws are self-tapping, which means that there is no need for a pilot hole to be pre-drilled. It is available in stainless steel, carbon steel, and alloy steel to bear more wear and tear while al...
  • Good Quality Hex Head Screw Bolt - Heavy Duty Self Drilling Metal Screws – Chuanyi

    Good Quality Hex Head Screw Bolt - Heavy Duty Self Drilling Metal Screws – Chuanyi

    Description Self drilling screws made of hardened carbon steel or stainless steel are used for fastening . Classified by the pitch of thread, there are two common kinds of self drillingl screw threads: fine thread and coarse thread. A self-drilling screw is a type of self-tapping screw that also features a drill point. The sharp drill point will both drill a hole and form the mating threads in a single operation, that can tap its own hole as it is driven into the material. More narrowly...
  • Chinese Professional Flange Head Bolt - Stainless Steel Flange Lock Nuts – Chuanyi

    Chinese Professional Flange Head Bolt - Stainless Steel Flange Lock Nuts – Chuanyi

    Description Metric Lock Nuts all have a feature that creates a non-permanent “locking” action. Prevailing Torque Lock Nuts rely upon thread deformation and must be wrenched on and off; they are not chemical and temperature limited like Nylon Insert Lock Nuts but reuse is still limited. K-Lock Nuts are free-spinning and reusable. Reuse of Nylon Insert Lock Nuts is limited and the captive nylon insert is susceptible to damage by certain chemicals and temperature extremes; wren...
  • China Cheap price Large Flange Nut - Full Threaded Rod – Power Steel Specialist Trading Corporation – Chuanyi

    China Cheap price Large Flange Nut - Full Threaded Rod – Power Steel Specialist Trading Corporation – Chuanyi

    Description Full threaded rods are common, readily available fasteners that are used in multiple construction applications. Rods are continuously threaded from one end to the other and are frequently referred to as fully threaded rods, redi rod, TFL rod (Thread Full Length), ATR (All thread rod) and a variety of other names and acronyms. Rods are typically stocked and sold in 3′, 6’, 10’ and 12’ lengths, or they can be chopped to a specific length. All thread rod that is cut to shorter ...